HATO SWING 400, Assembly And Operation Manual

Page: 13 / 36

set the gate manually in the fully closed position.
Controlling the wicket (opening the M1 leaf) is possible in the
fully closed position after synchronizing the end positions.
The HELB9C controller is equipped with an additional potential-free NO contact. It can
perform two functions:
•
the electric lock switch of the gate - 0.5s before starting the movement in the opening
direction, is turned on to unlock the striker - activation time 3s.
•
universal CH2 output channel - controlled by the transmitters assigned to the WICKET /
CH2 functions.
The operating mode of the transmitters assigned to the
WICKET function depends on the operating mode of the CH2 / EZ
output. With CH2 / EZ set to ON, the transmitters control the M1
leaf (from fully closed), and with CH2 / EZ set to OFF, they
independently control the CH2 / EZ relay.
TECHNICAL SPECIFICATION OF THE HEL B9C CONTROLLER
Controller power supply AC /-10% 50Hz
Working temperature range -20 to +70°C
Motor supply voltage AC 230V+/-10% 50Hz Vac
Standby power consumption <3W (without accessories)
Radio receiver 433.92MHz OOK
Transmitter type
HELB9C HATO company compatible with
Keeloq transmission
Memory of transmitters 32 pcs
Maximum engine power <=500W
CH2 channel maximum load
capacity 1A/30VDC, 0.3A/60VDC,
0.5A/125VAC
Maximum auto-closing time 25min
Maximum working time 2min
Maximum break time 10s when opening
20s when closing
Fuse type 5A/230V, ø5x20
Weight
HELB9C 470g
13