HATO SWING 400, Assembly And Operation Manual

Page: 26 / 36

The M2 leaf will open at a slow speed.
LED1 will light up.
After reaching the limit switch, the M2 leaf
will stop in the fully open position. LED1
will turn off.
OR
To assign positions manually, press the SBS
sequential control button for less than 3s or
the transmitter button assigned to this
function.
LED1 will turn off.
M2OL
or SBS
Press the SBS sequence control button for
less than 3s or the transmitter button
assigned to the SBS function.
or SBS
The M2 leaf will start to close with the
power set on the FORCE potentiometer.
LED1 will light up.
To define deceleration positions before full
opening, press the SBS sequence control
button for less than 3 seconds or the
transmitter button assigned to this function.
or SBS
The M2 leaf will open at a slow speed.
LED1 will light up.
After reaching the limit switch, the M2 leaf
will stop in the fully closed position. LED1
will turn off.
OR
To assign positions manually, press the SBS
sequential control button for less than 3s or
the transmitter button assigned to this
function.
LED1 will turn off.
M2CL
or SBS
Press the SBS sequence control button for
less than 3s or the transmitter button
assigned to the SBS function.
or CH1
The M1 leaf will start to close with the
power set on the FORCE potentiometer.
LED1 will light up.
To define deceleration positions before full
opening, press the SBS sequence control
button for less than 3 seconds or the
transmitter button assigned to this function..
or SBS
The M1 leaf will open at a slow speed.
LED1 will light up.
After reaching the limit switch, the M1 leaf
will stop in the fully closed position. LED1
will turn off.
M1CL
26