Hasselblad H5D User Manual Download Page 68

Page: 68 / 118

WI-FI CONNECTION VIA PHOCUS MOBILE

(H5D-50c Wi-Fi model only)

Connectable cameras

appear under Hosts in

Phocus Mobile..

RED

Not connected.

GREEN

Connected to

the Wi-Fi network but

not to Phocus Mobile.

BLUE

Connected to

both the Wi-Fi network

and to Phocus Mobile.

Assuming that an iPhone/iPad is connected to:
a)

the same network as you intend to use

, or that

Direct (AP)

connection has already been established

you will see a list of connected cameras and Phocus appli-

cations running under

Hosts

. Cameras appear as camera

icons together with their specific serial numbers. Click on

the camera icon with the relevant serial number to connect.
Please note that in

Direct (AP)

mode, only one iPhone/iPad

can be connected at the same time.

The rear display on the camera will indicate the status of the

Wi-Fi connection with different coloured icons:

Only accessible when the optional accessory GIL GPS Receiver is attached.

SETTINGS

GPS

Summary of Contents for H5D






















































































































Search results

Summary of Contents for H5D

Reviews:

Related manuals for H5D

Brands by name

Popular brands

Hasselblad H5D, User Manual

Search results

Summary of Contents for H5D

Reviews:

Related manuals for H5D

Brands by name

Popular brands