Hasselblad H5D, User Manual

Page: 62 / 118

62
 DISPLAY
SENSOR UNIT MENU > SETTINGS > USER INTERFACE > DISPLAY
This setting controls the level of Contrast and Brightness (both on a scale of 1-10 )
on the display. Usually, you should leave this set to the default level of 5; however
in some viewing environments and/or with some types of images you may wish to
increase or decrease this value. A value of 10 provides maximum contrast; a value
of 0 provides no contrast (a black screen) while a value of 10 provides maximum
brightness; a value of 0 provides minimal brightness. Lower brightness values re-
quire less battery power.
1. Press MENU .
2. Navigate to Settings (use the Rear scroll wheel or the Navigator ).
3. Navigate to
User Interface
(use the
Rear scroll wheel
or the
Navigator
).
5. Navigate to
Display
(use the
Rear scroll wheel
or the
Navigator
).
6. Press the
True Focus
or
AE-L
button
( or the
ZOOM
button) to step
through options.
7. Save the chosen selection by pressing EXIT ( MENU button).
 DATE & TIME
SENSOR UNIT MENU > SETTINGS > USER INTERFACE > DATE & TIME
The H5D has an internal clock that keeps track of the date and time. This informa-
tion is used to mark each shot with the date and time at which it was taken. It is
also used to label folders with the date on which each folder was created. ( See note
under General overview of sensor unit about keeping the internal battery charged to
maintain Date and Time settings ).
1. Press
MENU
.
2. Navigate to
Settings
(use the
Rear scroll wheel
or the
Navigator
). .
3. Navigate to User Interface (use the Rear scroll wheel or the Navigator ). .
4. Navigate to Date & Time (use the Rear scroll wheel or the Navigator ). .
5. Navigate to required item to select it.
6. Press the
True Focus
( ) or
AE-L
( ) buttons
–
(or the
ZOOM
button)
–
to
step through options.
7. Save the chosen selection by pressing EXIT ( MENU button).
Navigator Display
Zoom
Menu