42 HASCO hot runner
In the menu bar
After the arrow button has been activated, the symbol will change to a square with a coloured background. This indicates
that the outputs are active.
To deactivate the outputs, the square must be pressed. The triangle for switching on the outputs will then appear again.
5.6 Standby operation
In the menu bar
When the outputs are switched on (see above), pressing the pause button for a longer period of time will initiate the
temperature reduction mode in which the temperature of all the zones is reduced to the specified standby temperature.
This function affects all the active zones.
“Standby” is displayed in the zone designation and the setpoint value for standby appears in the setpoint display.
The value of the standby temperature can be set individually in Setup > Quick start > Setpoint values.
In the menu bar
During standby, the pause button changes and is displayed with a coloured background. If the pause button is pressed
again, standby mode will be cancelled and the pause button will appear in its non-activated presentation again with a
white background.
