24 HASCO hot runner
Y [%]
70%
Setting limits: 0 … 100%
Factory setting: 100%
5.3.2 Operation
Under operation, the main functions that are required during the process can be selected. This includes the home view
for changing the setpoint values, output levels and operating modes, the diagnosis for fault analysis, the plotter for
analysing zone profiles over time, the control parameters and an overview of all parameters that can be saved as a
recipe.
Figure 11 -
Operation
These functions are described in greater detail below.
5.3.2.1
Home view
1.
Menu bar: Home view or Operation > Home view
The home view shows all the zones with their process values, faults and information on the operating status.
5.3.2.1.1 General presentation
The data is depicted in the following manner:
Zone status
Presentation
Zone active
Black background
Zone inactive
Grey background. Zone is off.
Manual
Zone in manual operation, process values in blue
Monitor
Zone in monitoring operation, process values in orange
Boost
Zone in boost mode
Standby
Zone in standby mode
BSF
Behaviour in the event of sensor fracture is depicted in the zone
designation box: BSF = ….
Fault icon
The fault icon flashes in the zone designation box. Clicking on the fault icon
will call up the diagnosis.
Home view
Diagnosis
Plotter
Control
All parameters
Operation
Setpoint values
Operating mode
Boost
Control dynamics
Heating signal
Overview
Recipes
Malfunctions
Events
