40 HASCO hot runner
directory, the process can be confirmed
or cancelled with X. If the files have
been successfully moved, this will be indicated by a brief message at the bottom of
the screen.
Rename file
To rename a file, select one or more files from the list of available files by clicking
on the file name. The dialogue will then open on the right-hand side of the screen.
Clicking on “Rename” and “Confirm selection” will activate the dialogue for entering
the new name, which is then adopted by pressing Return . Successful renaming
is indicated by a brief message at the bottom of the screen.
Delete file
To delete a file, select one or more files from the list of available files by clicking on
the file name. The dialogue will then open on the right-hand side of the screen.
Clicking “Delete” and “Confirm selection” will delete the selected files.
5.3.3.2
Communication
1.
2.
3.
Settings > Device > Communication
Communication contains the parameters of the Ethernet interface which are required for a data exchange with the
controller via the FE3 protocol.
5.3.3.3
Service
1.
2.
3.
Settings > Device > Service
Service contains information and functions that are useful in the event of service cases.
Function
Description
Device info
Device info lists the most important information on the device and also on the
current software status of the installed hardware.
Firmware update
The firmware updates for the control device and power boards in the controller can
be carried out here. The update can be installed via a USB stick.
A USB stick with the update program must be connected up for updates to the
control device. The update process starts automatically.
For updates of the power boards, a USB stick with the firmware must be inserted
in the main directory and the device restarted. Then follow the instructions on the
starting page.
Once the update process is completed, the USB stick must be removed. The
controller will start again.
