10
1003370 05/2016 V01
YukonDrive®
BG2
BG3
BG4
-1021
-1022
-1031
-1032
-1041
-1042
Weight [kg]
1.0
1.5
2.8
B (width)
55
H (height)
1)
210
290
T (depth)
1)
142
189
235.5
A
27.5
A1
–
–
40
C
225
305
C1
5
D
4.8
E
direct end-to-end mounting (see note)
F
2)
≥100
≥150
G
2)
≥235
≥280
H1
235
315
Screws
2 x M4
4 x M4
all dimensions in mm
1)
without terminals/connectors
2)
the bend radius of the connecting cables must be taken into account
Note :
The minimum distance specified in the table for sizes 2-4 applies for devices of the same power. When butt mounting
devices with different drive power you should arrange the devices according to their power (e.g., viewed from the left,
BG4-BG3-BG2). This minimizes the thermal influence among each other.
When butt mounting YukonDrive® controllers together with other devices, you must make sure that these devices do
not affect one another thermally.
Dimensions
Note
:
For all sizes of the YukonDrive® forced cooling by external air flow
is necessary. The air must be able to flow unhindered through the
device. If a temperature cut-out occurs, the cooling conditions must
be improved.
Air flow: min. 1.2 m/s
Table 10.2
Illustration 10.1
