SAFETY GUIDE
4
SAFETY NOTE
ITEMS YOU SHOULD NOTE WHEN USING THE ACTUATOR
•
PRECAUTIONS FOR ACTUATORS AT THE APPLICATION DESIGN PHASE
Always use under followings conditions.
The actuator is designed to be used indoors. Observe the following conditions:
・
Ambient temperature: 0
℃
to 40
℃
・
Ambient humidity: 20% to 80%RH (Non-condensation)
・
Vibration: Max 25 m/s
2
・
No contamination by water, oil
・
No corrosive or explosive gas
Follow the exact instructions in the related manuals to install
the actuator in the equipment.
・
Ensure precise alignment of the actuator shaft center and the
corresponding center in the application.
・
Failure to observe this caution may lead to vibration, resulting in damage of
output elements.
•
PRECAUTIONS FOR ACTUATORS IN OPERATION
Comply with the toque limits for the actuator.
・
Be aware, that if by accident, the arm attached to the output element hits a
solid object, the output element may become uncontrollable.
Never connect cables directly to a power supply socket.
・
Each actuator must be operated with a proper driver.
・
Failure to observe this caution may lead to injury, fire or damage of the
actuator.
Do not apply impacts and shocks
・
The actuator directly connects with the encoder so do not use a hammer
during installation.
・
Failure to observe this caution could damage the encoder and may cause
uncontrollable operation.
Avoid handling of actuators by cables.
・
Failure to observe this caution may damage the wiring, causing
uncontrollable or faulty operation.
CAUTION
WARNING
