Micro Series
1-62 Micro Series
Document generated: 04.10.17
SW V1.2
The CR EQ tab displays a graphic equalizer (GEQ) that is inserted into the CR
MON LSP signal path. It can be used to flatten undesired room resonances
of the control room.
1
[2]
[ ]
[ ]
[3]
[ ]
[ ]
[1]
CR EQ
Activates the GEQ when illuminated.
[2]
Left side
This area displays an overview icon of the left side portion of the GEQ. Click-
ing/touching onto this area allows to operate the 32 bands of the GEQ in the
large window below.
[3]
Link/Unlink
Clicking/touching onto this area unlinks the left- and the right side of the
GEQ. As a default, the left and right side are linked, allowing to control either
side of the GEQ while the parameters of the other side automatically are set
to the same values.
Please note that when linking both sides, always the current setting of the left
side GEQ is taken and applied to both sides.
[4]
Right side
This area displays an overview icon of the right side portion of the GEQ.
Clicking/touching onto this area allows to operate the 32 bands of the GEQ
in the large window below.
[5]
GEQ bands
These are the actual GEQ bands that can be used to set the desired band values
in a range of +/- 15dB. Clicking/touching and dragging at the same time slides
the bands up or down.