Micro Series
Micro Series 1-47
Document generated: 04.10.17
SW V1.2
The config page of the channels de-esser section holds control elements
necesarry to set the channels De-esser parameters :
1
1
2
11
[1]
DeEsser On/Off
Activates the De-Esser when illuminated.
[2]
RTA
A real time frequency analysis of the channels signal is computed and dis-
played in the spectrum field of the De-Esser. This is a visual aid helping the
operator to find the problematic areas of the channels signal.
[3]
Reverse
The reverse function allows listening to the part of the signal which is going
to be removed by the De-Esser.
[4]
Freq
Sets the operation frequency of the De-Esser.
[5]
Q
Sets the width of the bandpass filter.
[6]
Threshold
Sets the threshold of the bandpass compressor.
[7]
Ratio
Sets the ratio of the bandpass compressor.
[8]
Attenuation
Controls the amount of gain reduction. Attenuation is only available when
Auto
is active.
[9]
Auto
Enables automatic threshold, which dynamically adjusts the De-Esser thresh-
old according to the incomming audio. When
Auto
is active,
Ratio
and
Threshold
controls are disabled in place of
Attenuation
.
[10]
Reset
This button sets all values of this processing block to the default values.
[11]
Presets
Opens the preset window for the De-Esser presets.