Micro Series
1-64 Micro Series
Document generated: 04.10.17
SW V1.2
On the
Network
tab, the network states are shown and the network can be
configured.
1
2
[1] Hotspot status display
Here the current status of the internal Hotspot is shown.
The base unit of the OnAir Micro is able to produce its own WLAN, or with
other words, it has its own Wireless Access Point (WAP).
When the Hotspot is enabled, the Wi-Fi is automatically disabled and vice
versa.
[2] Wi-Fi status display
This section shows the current state of the Wi-Fi section. When the Wi-Fi is
enabled, the Hotspot is automatically disabled and vice versa.
[3] Ethernet status display
Here the current settings of the wired Ethernet port are shown. The Ethernet
port can be used while Hotspot/Wi-Fi access is also active.
[4]
Config
button
By pressing this button, the network configuration pages are opened.
The Config logon window appears, and the following password need to be
entered :
Password :
admin
