manualshive.com logo in svg

Harman Studer Micro Series, Operating Instructions Manual, Page: 106 / 111

Share
Download
Harman Studer Micro Series Operating Instructions Manual Download Page 106

Micro Series

Micro Series 1-89

Document generated: 04.10.17

SW V1.2

3.7

Setting up Dante

To control and setup the Dante network, please use the Dante Controller 
software that can be downloaded under :

https://www.audinate.com/products/software/dante-controller

Within the Dante Controller software, all network devices are displayed in a 
matrix and you can make the signal routing from and to the different devices.

Within the Micro Core, the received Dante streams are available from the 
input ports AES67/DANTE #1 - 8.
The signals that are assigned to the output ports AES67//DANTE#1-8 will 
be transmitted as Dante streams.

There are two AES67/Dante ports, which means that the Dante Controller 
will see two Micro Core devices when both ports are connected to the Dante 
network.

Note :

Since the built-in Dante ports do not accept external sync reference (Enable 
Sync to External), it is not meaningful to use the Micro Core as Preferred 
Master within a Dante/AES67 network.

3.8

Firmware update

To perform a software update of the Micro Core, the latest software file can 
be downloaded from the Studer website. The software file has a .zip file 
extension and is named like this :

oamupdate-X.X.XXXX-usb.zip

Where the Xs stand for the latest software version. 
This file can be copied to the root folder of a USB media, which then can be 
inserted into the Play/Rec USB port of the base unit.
Once the USB media is scanned. the software file is automatically detected 
and the update process is started. All following process steps are then guided 
by instructions that are shown on the screen or GUI of the Micro Core.

Summary of Contents for Studer Micro Series
















































































































Reviews:

No comments