Micro Series
1-30 Micro Series
Document generated: 04.10.17
SW V1.2
a portable products to be used in different environments. Therefore the User
Snapshot contains all required settings of a broadcast session. User Snapshots
can be created, saved, loaded, renamed and deleted by the user at any time.
Details see
chapter 2.1.9.2
.
[5]
Talk Ext.
This button activates the external talkback. TB source and destination can be
configured. Details see
chapter 2.1.9.3
.
[6] Program meter
The Program meter is displaying the audio level of the Program bus. The
headroom level and balistics can be configured. Details see
chapter 2.4 -
Meter tab.
[7] CR Monitor meter
The Monitor meter is displaying the audio level of the source which is cur-
rently chosen by the CR monitor. The headroom level and balistics can be
configured. Details see
chapter 2.4 - Meter tab.
[8]
Monitor Cut
This button lets the operator manually cut the CR monitor. In addition, CR
cut is applied automatically when a channel of the role “DJ” or “Guest” gets
on-air.
[9] CR Monitoring Options
This button opens the dialog to set the CR Monitoring Options. Details see
chapter 2.2.5
.
[10] Guest Monitoring Options
This button opens the dialog to set the Guest Monitoring Options. Details see
chapter 2.2.6
.
[11] Source displays
These three displays show the sources of the three different monitoring facili-
ties.
[12]
CR Speaker level
Lets the operator set the level of the CR monitor speakers
[13]
CR Headphone level
Lets the operator set the level of the CR headphones
[14]
Guest Headphone level
Lets the operator set the level of the Guest headphones
2.1.9.1
USB Recorder
1
2
At the moment an USB media is inserted into the Play/Rec USB port, a per-
formance test of the media is carried out. When the media’s performance is
sufficient, the LED next to the Play/Rec USB port turns green.
[1] Status Indication
With a valid USB media inserted, this display shows the amount of free
memory of the inserted USB media. Below the free memory, the total amount
of the inserted media’s memory is shown in [GB].Then, there is a progress-
bar indicating the used memory of the USB storage media. Within the prog-
ress bar, the predicted remaining recording time is displayed in the format
hh:mm:ss.
[2] Recording buffer
This thin bar shows the current usage of the recording buffer.
