manualshive.com logo in svg

Harman Studer Micro Series, Operating Instructions Manual

Share
Download
Harman Studer Micro Series Operating Instructions Manual Download Page 65

Micro Series

1-48  Micro Series

Document generated: 04.10.17

SW V1.2

The config page of the channels eq section holds control elements necesarry 
to set the channels eq and high- and lowpassfilter :

1

2

[1]

EQ On/Off

Activates the EQ when illumnated.

[2]

Highpass filter On/Off

Activates and deactivates the highpass filter.

[3]

Lowpass filter On/Off

Activates and deactivates the lowpass filter.

[4]

RTA

A real time frequency analysis of the channels signal is computed and dis-
played in the spectrum field of the EQ. This is a visual aid helping the operator 
to find the problematic areas of the channels signal.

[5]

Freq

Controls the frequency parameter of the selected EQ band. One of the four 
EQ bands can easily be selected by clicking or touching onto the numbered 
(1-4), coloured circles on the frequency axis.

[6]

Q

Sets the width of the EQ band.

[7]

Gain

Sets the gain  (+/- 18dB) of the EQ band. 

[8]

Reset

This button sets all values of this processing block to the default values.

[9]

Presets

Opens the presets window for EQ presets.

The EQ can also completely be operated on the spectrum field - either by 
using mouse or touchscreen. 

Summary of Contents for Studer Micro Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands