manualshive.com logo in svg

Harman Studer Micro Series, Operating Instructions Manual

Share
Download
Harman Studer Micro Series Operating Instructions Manual Download Page 37

Micro Series

1-20  Micro Series

Document generated: 04.10.17

SW V1.2

2.1.4

Send View

The send view shows the mixers four send channels. Each of these four chan-
nels can either be an Aux or N-1 send. Here, the send master faders can be 
operated.

[ ]

[2]

[ ]

[ ]

[ ]

[ ]

[1]

Label

The label display shows the send channels name. This name can be entered 
in the Options page of the send channel. 

[2]

Talk

 button

This button can be used to talk to the output of this send channel. 

[5] SIG Indicator

The green signal indicator is illuminated as soon as the signal on the send bus 
is > -40dB. The signal is captured before the send fader.

[6]

Fader

The send fader. It can be operated by mouse or touch. The mousewheel can 
also be used to operate the fader when hovering the mousepointer anywhere 
over the fader area.

[7]

On

 button

The On button activates the send channel. 

[8]

PFL

 button

The PFL button allows the operator to pre- listen to this channel even if the 
fader is closed or the channel is not switched to ‚On‘. PFL stands for PreF-
adeListening. The Reset PFL button in the central section releases all channels 
from PFL.

Summary of Contents for Studer Micro Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands