manualshive.com logo in svg

Harman Studer Micro Series, Operating Instructions Manual

Share
Download
Harman Studer Micro Series Operating Instructions Manual Download Page 96

Micro Series

Micro Series 1-79

Document generated: 04.10.17

SW V1.2

The following table shows all output functions :

Function

Argument 1

Argument 2

Argument 2

Description

CHANNEL ON

Channel1..12

Send1..4

Reflects the On/Off status of channels and sends.

CHANNEL PFL

Channel1..12

Send1..4

PRG, REC

Reflects the PFL On/Off status of channels, send and

FADERSTART

Channel1..12

Reflects the AND combination of channel’s

On/Off- and fader status.

FADPFL

Channel1..12

Same as FADERSTART, but also active when chan-

nel’s PFL is active. (FADERSTART OR PFL.)

CHANNEL ON MASTER

Channel1..12

The function becomes active when the specified 

channel is either on PRG or REC output.

(Channel On-Master condition)

RedLight Studio

The function becomes active when a microphone is 

either on PRG or REC output.

In other words, at least one channel with role DJ

or Guest fulfils the Channel On-Master condition.

ONAIR

The function becomes active when at least one chan-

nel is OnAir.

RECORD

The function becomes active when at least one chan-

nel is on the REC output.

One of the the following conditions must be fulfilled 

for at least one channel:

 

AND
the fader is open
AND
the channel is assigned to REC bus
AND
the REC fader is open

 

AND
the fader is open
AND
Off Air Record is active on the channel
AND
the REC fader is open

TALKBACK

Source :

TBfromANY

TBfromCH1..12

TBfromEXTERN

Destination :

TBtoANY

TBtoCR

TBtoDJ

TBtoGUEST

TBtoSend1..4
TBtoEXTERN

The function becomes active when TB from Source to 

Destination is active.

The GPOutput can be used to control external

intercom systems for TB button illumination.

The function does not indicate incoming

TB.

CR MON SRC

PRG, REC

Send1..4
EXTERN

PFL

The function becomes active when the specified 

monitoring source is currently active on the CR moni-

toring.

GUEST MON SRC

PRG, REC

Send1..4
EXTERN

FOLLOW CR

The function becomes active when the specified 

monitoring source is currently active on the Guest 

monitoring.

PFL ACTIVE

The function becomes active when any channel PFL 

is active.

Summary of Contents for Studer Micro Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands