manualshive.com logo in svg

Harman Martin VDO Fatron 20, User Manual

Share
Download
Harman Martin VDO Fatron 20 User Manual Download Page 7

Safety information

 7

Safety information

The following symbols are used to identify important safety information on the product and in this document:

Warning!

• Read this user manual before installing and operating the Martin® VDO Fatron™. Keep this user 

manual for future reference.

• Follow the safety precautions given in this user manual and in the user documentation of all the 

devices you connect to it. Observe all warnings given in user documentation and printed on 
devices. Make sure that everyone who is involved in working on or using the VDO Fatron has read 
and understood these safety precautions and warnings.

• Install, connect, operate and service devices only as described in this user manual and in 

connected devices’ user documentation and only in accordance with local laws and regulations. 
Martin® user documentation is supplied with devices and is also available for download from 
www.martin.com. 

• The VDO Fatron is not for household use. It presents risks of severe injury or death due to fire and 

burn hazards, electric shock and falls. It must be installed by qualified technicians only.

• The VDO Fatron does not have user-serviceable parts. LEDs are not replaceable. Refer any 

operation not described in this manual to Martin® Global Service or Martin® authorized service 
agents.

If you have any questions about how to operate the VDO Fatron safely, please contact your Martin® supplier 
or call the Martin® 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.

PROTECTION FROM ELECTRIC SHOCK

• Read and respect the directions given in the user manuals of all the devices that you intend to connect to 

the VDO Fatron, particularly the instructions, warnings and limits that apply to:
- system layout,

- connections to other devices,

- specified cables,

- maximum cable lengths, and 

- maximum number of devices that can be connected.

• Use only the cables specified in this manual and on the Martin® website at www.martin.com to 

interconnect devices in the installation. If the specified cables are not long enough for an intended cable 
run, consult Martin® for assistance in finding or creating a safe alternative solution.

WARNING!

Read the safety precautions in this section before 

installing, powering, operating or servicing this 

product.

Warning!

Safety hazard. 
Risk of severe 

injury or 

death.

Warning!

Hazardous 

voltage. Risk 

of severe or 

lethal electric 

shock.

Warning!

Fire hazard.

Warning!

Refer to user 

manual.

www.audiovias.com

Summary of Contents for Martin VDO Fatron 20





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands