manualshive.com logo in svg

Harman Martin VDO Fatron 20, User Manual

Share
Download
Harman Martin VDO Fatron 20 User Manual Download Page 48

 48

VDO Fatron™ Family Safety and Installation Guide

Connectors

Power + Data Cable Connector, BBD, Male. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 91611750
Power + Data Cable Connector, BBD, Female  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 91611751
Blanking Caps for unused female BBD connectors, set of 10 . . . . . . . . . . . . . . . . . . . . . . . .  P/N 91616052

Related Items

Martin® P3 PowerPort 1500  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721040
Martin® P3 PowerPort 1000 IP, rental model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721070
Martin® IP66 PSU 240W external power supply unit (was Tripix Power IP66) . . . . . . . . . . .  P/N 90760330
Martin® P3-050 System Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721090
Martin® P3-100 System Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721010
Martin® P3-150 System Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721015
Martin® P3-200 System Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721020
Martin® P3-300 System Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721060
Martin® P3-PC System Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90721030

Ordering Information

Flightcase for 15 x VDO Fatron™ 320 mm / 5 x VDO Fatron™ 1000 mm. . . . . . . . . . . . . . .  P/N 91515045
Flightcase Extender for 15 x VDO Fatron™ 320 mm / 5 x VDO Fatron™ 1000 mm . . . . . . .  P/N 91515046

VDO Fatron 20™

VDO Fatron™ 20, 320 mm, in cardboard box*  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90357691
VDO Fatron™ 20, 1000 mm, in cardboard box*  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  P/N 90357692

*Please order flightcases and flightcase extenders separately from fixtures

Specifications subject to change without notice. For the latest product specifications, see www.martin.com

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

Canadian Interference-Causing Equipment Regulations - 

Règlement sur le Matériel Brouilleur du Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le Matériel Brouilleur du Canada.

Protection of IT Equipment

Not for use in a computer room as defined in the Standard for the Protection of Information Technology Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d'ordinateurs telle que définie dans la norme ANSI/NFPA 75 ‘Standard for the Protection of 
Information Technology Equipment’.

EU Electromagnetic Compatibility

Warning: Operation of this equipment in a residential environment could cause radio interference.

Caution: This product has been tested and found to comply with EMC (electromagnetic compatibility) standards as a single unit. 
Using multiple products together may have an impact on the EMC performance of the complete system, and this could cause EMI 
(electromagnetic interference). If this occurs, the user may be required to take appropriate steps to reduce interference.

Disposing of this product

Martin® products are supplied in compliance with Directive 2012/19/EC of the European Parliament and of the 
Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), where applicable.

Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can give 
details of local arrangements for the disposal of Martin® products.

www.audiovias.com

Summary of Contents for Martin VDO Fatron 20





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands