Hardy H6800 Series Application Controllers User Guide
109
APPENDIX B - APPLICATION-SPECIFIC
PROGRAMMING OPTIONS
This appendix describes how to configure application-specific programming options.
B.1 Level Measurement
B.2 Piece Count
B.3 Rate of Change Parameters
Path:
Home screen > Operation Menu > App > Rate Of Change
If your HI6800 Series Application Controller has access to the rate of change application, refer to
the table below for configurable parameters.
Parameter
Description
ROC Enable
Turns the rate of change ON or OFF.
Range: ON, OFF
Default: OFF
Time/Measure
Unit used to measure time.
Range: g/sec, g/min, g/hr
Default: g/sec
