Chapter 5 – Configuration
Hardy H6800 Series Application Controllers User Guide
56
5.1 Accessing Configuration Parameters
There are several ways to configure HI6800 Series Application Controllers:
•
Using the touchscreen (see section 5.1.1)
•
Using an Ethernet network connection and embedded webserver (see section 5.1.2)
•
Using a direct connection to a PLC, PAC, or DCS control system (see section 5.1.3)
5.1.1 Using the Touchscreen
The touchscreen interface provides quick and simple operation by directly touching the
menu items and parameter with a finger. Touch the screen with a finger or blunt object only.
Using sharp objects, such as a screwdriver, can harm the touchscreen.
Accessing set-up with a 4.3-inch display:
•
Press the MODE button until SETUP appears on the touchscreen.
– Typical MODE button cycle: Gross / Net / Setup / Gross
•
Press the SETUP button on the touchscreen to enter Parameters.
– Access additional parameter pages by swiping left or right using the touchscreen.
Figure 5-1. Accessing the Set-up Parameters with a 4.3-inch Display
