Chapter 5 – Configuration
Hardy H6800 Series Application Controllers User Guide
60
3. Configure the PC to use the same IP address as the application controller. The following
steps describe how to do this on Windows 10 and Windows 7. For other operating
systems, refer to the instructions found on the Internet:
a. In Windows 7, go to
Start > Control Panel > Network and Sharing Center
and click
Local Area Connection
.
b. In Windows 10, click
Start > Settings > Control Panel > Network and Internet >
Network and Sharing Center > Change adapter settings
.
c. In the opened list of network connections, select the correct LAN connection used to
connect to the application controller. Double-click the connection.
d. In the next window, click the
Properties
button.
e. Select
IP version 4 (TCP/IPv4)
and click
Properties
. In the Protocol Properties
window, select
Use the following IP address
.
f. In the
IP address
field, enter the same first 3 octets from the application controller, but
change the last octet by 1 number. For example, if the fixed IP address for the
application controller is 192.168.0.100, enter 192.168.0.101, in the
IP address
field.
g. In the
Subnet mask
field, type 255.255.255.0.
h. Back out by clicking
OK
all the way back.
4. Open a browser on the PC.
5. In the address bar at the top of the browser, enter the application controller’s fixed IP
address (example 192.168.0.100) and press Enter. The application controller Home
screen appears in the browser.
