Hardi COMMANDER 5500 Instruction Book Download Page 113

Page: 113 / 170

6 - Maintenance

111

1000 Hours Service - Hydraulic Oil for TWIN system, Oil Change

Next oil change is after 1000 hours or once a year, whichever comes first.

The oil change should be carried out when the machine has been running for at least one hour so that the oil is at working
temperature.

The oil tank (A) is installed near the platform.

How To Find The Filling Point

Stand on the platform.

Pull the plastic hose (B) out of the clamps and place it on the
platform.

Unscrew the thumb screws (C).

Lift away the vertical plate (D) and place it temporarily up against
the handrail to the right.

Filler neck and filling cap (E) for the oil tank is placed next to the
clean water tank.

Summary of Contents for COMMANDER 5500











































































































































































Search results

Summary of Contents for COMMANDER 5500

Reviews:

Related manuals for COMMANDER 5500

Brands by name

Popular brands

Hardi COMMANDER 5500, Instruction Book

Search results

Summary of Contents for COMMANDER 5500

Reviews:

Related manuals for COMMANDER 5500

Brands by name

Popular brands