HappyJapan HCD3, Instruction Book

Page: 67 / 251

-RA -58
:Original point (Start point)
Embroidery
area
Embroidery area (Max. *1)
180mm (Normal cap frame)
360mm (Wide cap frame)
You can confirm the outline
and position of design.
70mm
(Normal cap frame)
85mm
(Wide cap frame)
7-B
CAP FRAME option
Starting to embroider
1. Press and move the frame to the
original point of pattern data by .
2. Press .
When you Press , the frame will start mov -
ing for the design trace. 14-5
Make sure that the pressure foot and needle
does not touch the frame.
When you Press , the machine will stop.
Go on to step 4 if you want to start embroidering
without tracing first.
3. Press , the design trace fineished.
The cap frame will return to the original point.
7_B R801
* The actual embroidery
area will be restricted by
the design and shape of
a cap.
Forward only when pressing
Frame move
Backward only when pressing