HappyJapan HCD3 Instruction Book Download Page 37

Page: 37 / 251

-DA -19

TURNING THE MACHINE ON

3_6 PC01

DANGER: To reduce the risk of electric shock.

Never leave the machine unattended when plugged in.

Always unplug this machine from the electrical outlet immediately after use and before per-

forming any maintenance on it.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

5. Select the desired frame with

: Tubular round frame

: Tubular square frame, One touch frame

: Cap and One-point frame.

: Border frame, Square clamp frame

: Sock frame

: User-defined frame

: Special frame

: Non registered

6. Select desired type of frame and Press

The display returns to the view of Step 3.

To disconnect, switch the power switch to the

off position, then remove plug from outlet.

Summary of Contents for HCD3




























































































































































































































































Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands

HappyJapan HCD3, Instruction Book

Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands