HappyJapan HCD3 Instruction Book Download Page 198

Page: 198 / 251

-SA -81

1. When the machine is stopped, press

2. Select “REPORT”.

3. Select

4. In order to exit the mode, proceed to the

step 5.

If you want to delete the record, press

4. Press

The display returns to MENU.

REPORT

22_4d O901

Record of thread break

This function will show thread break data of each needles.

In case of Multi-head embroidery machine, data line for each head will be displayed.

Press

to return to Drive mode.

Needle number

Total

Head number

Save the report

You can save the displayed records in CSV format.

Insert the USB memory into the machine and press

button then, new folder named

"Production Report" will be made and the report data will be saved as file name

BreakReport

_*****".

Summary of Contents for HCD3




























































































































































































































































Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands

HappyJapan HCD3, Instruction Book

Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands