manualshive.com logo in svg

HappyJapan HCD3, Instruction Book

Share
Download
HappyJapan HCD3 Instruction Book Download Page 57

-DA    -48

7-1

CAP FRAME option

Cap frame settings

2 types of cap frames, Normal and Wide, are available with this model. When you embroider by

using a cap frame, please ensure that a correct setting is selected according to each.

 CAUTION:    To avoid problems.

The machine and/or cap frame may be dam-

aged if the incorrect frame settings are used.

1. When the machine is stopped, press 

.

2. Press 

.

3. Select 

 “Cap  and One-point frame”.

4. Select desired type of frame.

Then Cap frame will be set.

5. Press 

 and 

.

The embroidery frame will move to the center .

7-1   O901

CAUTION: To prevent accidents.

The embroidery frame and carriage will move.

Please keep hands clear for your safety.

Press 

 to return to Drive mode.

Summary of Contents for HCD3




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands