HappyJapan HCD3 Instruction Book Download Page 58

Page: 58 / 251

-DA -53

7-2

CAP FRAME option

Installing and removing the cap drive frame

The cap drive frame must be installed onto the carriage to embroider a cap.

Please remove by reverse order of these step.

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

7-2 R801

3. Press

and Press

The embroidery frame will move to the center .

1. Turn on the power switch.

Push the power switch firmly so it will remain on.

Confirm that there are “Cap (Std.)” or “Cap

(Wide)” in the display.

If these icons are not in the display, please return

to “How to turn on the machine” on previous page

and change the cap frame.

2. Press

The carriage and frame will move slightly and

then the embroidery frame will return to the

previous position automatically.

OFF

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

OFF

4. Turn off the machine.

Summary of Contents for HCD3




























































































































































































































































Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands

HappyJapan HCD3, Instruction Book

Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands