HappyJapan HCD3, Instruction Book

Page: 49 / 251

-DA -46
1. When the machine is stopped, press .
2. Select “NEEDLE”.
The screen of color number 1 selection is dis-
played.
The current color number is showed in the pattern
data display portion.
3. Select the needle number.
After setting the needle number on color number,
the following color number selection is displayed.
You can also select color number directly.
You can switch color change numbers with
if the color change number has more than 5.
4. Select the needle number on all the color
change numbers.
Press
to return to Menu mode.
5-E
NEEDLE BAR SELECTION
5_E MA05
For each color change in a given pattern, the needle number loaded with the correct color
thread is assigned by the operator. When this is set, the machine automatically changes to the
programmed needle when the design reaches that point in the course of sewing the design.
You can not setting “NEEDLE” for selected “LOCK” design.
Please release “LOCK” from design. 11-1
Number of color Needle
Current color
Needle number
Color change number
Press to on the sub menu to check
the setting.