HappyJapan HCD3 Instruction Book Download Page 116

Page: 116 / 251

-SA -50

Press to return to Menu mode.

Press to return to Drive mode.

PATTERNS IN MEMORY

11_C Q701

11-E

5. Enter the whole or a part of the pattern

name.

The maximum number of characters in a design

name is eight letters or numbers.

All the letters and/or numbers are

deleted.

Selected letter or number is deleted.
Searching is cancelled.

6. Press

In this example, “CA” is entered as first 2 charac

ters of the design name.

Then, all design name which start from “CA” is

displayed.

7. Press displayed pattern icon to confirm your

selection.

Press

to leave from searching menu.

Number of searched pattern data

Selected pattern data

Summary of Contents for HCD3




























































































































































































































































Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands

HappyJapan HCD3, Instruction Book

Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands