HappyJapan HCD3 Instruction Book Download Page 36

Page: 36 / 251

-D3 -19

TURNING THE MACHINE ON

2. Connect the power plug to an electrical

outlet.

3. Turn on the power switch.

Indicates the select frame.

Please confirm the emergency stop button has

been released.

Push the power switch firmly so it will remain on.

4. In case you do not need to change frame

type, Press

After the carriage and frame move slightly, the

embroidery frame will return to the previous

position automatically.

Machine becomes ready for operation.

3_5 RC01

5-1

CAUTION: To prevent accidents.

The embroidery frame and carriage will move.

Please keep hands clear for your safety.

1. Connect the power cord to the inlet on

the right side of the machine.

In case you want to change frame type,

Press

OFF

How to turn on the machine

CAUTION

The touch screen can be operated by finger, but in some cases sensitivity of the screen will

be affected by condition of the finger.

In such cases, please use the fingertip or built-in stylus to hit small touch targets.

Selected frame

Power switch

Summary of Contents for HCD3




























































































































































































































































Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands

HappyJapan HCD3, Instruction Book

Search results

Summary of Contents for HCD3

Reviews:

Brands by name

Popular brands