Hanwha Vision XRN-3210B4, User Manual

Page: 59 / 131

English
_59
iVa
Setup > event > event setup > iVa
●
IVA : You can set whether to enable intelligent video analytics.
●
Type : You can set a virtual line, virtual area, and detection excluded area.
– Virtual line : Set the virtual line to enable intelligent video analytics.
– Virtual area : Set the area to enable intelligent video analytics. You can set the details of virtual areas to fit
your purposes.
￭
Intrusion : Creates an event when the motion of an object in the designated area is detected.
￭
Enter : Creates an event when a moving object enters into the target area from the outside.
￭
Exiting : Creates an event when a moving object goes out of the target area.
￭
Appear/Disappear : When an object which does not exist inside the area designated by the user appears inside the area without passing the
area line and remains for a certain period of time, or if an object which exists inside the area disappears, an event is created. You can enter the
duration to be recognized as an event.
￭
Loitering : Creates an event when the motion of a loitering object in the virtual area is detected. You can enter the duration to be recognized as
an event.
– Detection excluded area : Set the area to not enable video analytics in the virtual line and the virtual area.
– Add : After selecting the desired area item, set the area on the preview screen.
– Area initialization : You can clear all the set areas.
●
Sensitivity : You can set the motion detection sensitivity for the virtual line and the virtual area.
●
Detection result display : You can overlay the detection area over video.
●
Activation time : You can set the activation time to recognize motion analysis.
– Always : Detects motion analysis regardless of time.
– Schedule : Detects motion analysis only during the set period. Click <
Setup
> to set the detection schedule.
●
Object size : You can set the size of the object to recognize the motion.
– Click < Setup > to select the minimum/maximum size and set the object size on the preview screen.
●
Object : You can set the object to enable video analytics.
￭
Objects are visible only when an AI camera is connected.
￭
Object details may vary depending on the recorder model.
￭
Each camera product support different features. For more information, see the camera manual or help.
motion
Setup > event > event setup > motion
●
Motion detection : You can set whether to enable motion detection.
●
MD type : You can set a detection area and a detection excluded area.
– Detection area : Set the area to detect motion.
– Detection excluded area : Set the area to not detect motion.
– Add : After selecting the desired area item, set the area on the preview screen.
– Area initialization : You can clear all the set areas.
●
Object size : You can set the size of the object to recognize the motion.
– Click <
Setup
> to select the minimum/maximum size and set the object size on the preview screen.
●
Detection level : You can set the basic level required for motion detection. Level values can be set for each
detection area set in <
mD type
>. If a motion value is bigger than the set level, then a motion detection event
is triggered.
●
Detection result display : You can overlay the detection area over video.
●
Sensitivity : You can set the sensitivity of motion detection for each area. Set a lower sensitivity for an
environment where the background and an object are clearly distinguishable and a higher sensitivity for an
environment where the background and an object are not clearly distinguishable.
●
Activation time : You can set the activation time for motion detection.
– Always : Detects motion regardless of time.
– Schedule : Detect motion only during the set period. Click <
Setup > to set the detection schedule.
￭
Each camera product support different features. For more information, see the camera manual or help.
•
S
etup