manualshive.com logo in svg

Hanwha Vision XRN-3210B4, User Manual

Share
Download
Hanwha Vision XRN-3210B4 User Manual Download Page 118

118_

 setup viewer 

setup viewer 

raid

This function is only available for products that support RAID.  
(Refer to the "

Functions supported by Model

" page.)

You can set the RAID (Redundant Array of Independent Disks) mode.

distributed recording

This function is only available for products that support distributed recording.  
(Refer to the "

Functions supported by Model

" page.)

By allocating a certain portion of HDDs to each group, you can distribute the amount of recording for optimal 
saving.

s.M.a.r.t

You can check the connection status and details of the hard disk mounted in the recorder.

Monitor

You can set the information displayed on the monitor as well as the output system.

setup > device > Monitor

￭ 

If the screen does not work properly, see “

Troubleshooting (FAQ)

” in the Appendix.

￭ 

The Monitor Setup settings control the monitor connected to the Recorder.

￭ 

Video exceeding the resolution of 1080p will not be displayed from the secondary monitor. 

Summary of Contents for XRN-3210B4




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands