manualshive.com logo in svg

Hanwha Vision XRN-3210B4, User Manual

Share
Download
Hanwha Vision XRN-3210B4 User Manual Download Page 52

52_

 setup

setup

Setting the profiles

Setting the recording profile

You can configure the video profile settings for instructing the network camera (connected to each channel) to 
make recording.

Setup > camera > profile setup > record

￭ 

You can configure the settings only for the profiles that are supported by the camera.

￭ 

If the profiles used for recording and network are different, camera's video feed may not comply with the frame rate as specified in the 
camera.

￭ 

It is recommended to set the identical codec for the Record/Live/Remote profile when setting the camera profile.

● 

 : Displays the camera of the corresponding channel as a list or a thumbnail.

● 

Camera name : Display the camera name.

● 

IP address : Display the IP address of a camera.

● 

Profile : You can select the recording profile for selected channel.

● 

Codec : You can check the codec for selected channel.

● 

Resolution : You can select the resolution for selected channel.

● 

Frame rate : You can set the frame rate for selected recording profile.

● 

Edit : You can add, change, and delete the camera profiles.

Setting the Live profile

You can change the live transfer settings of the network camera.

Setup > camera > profile setup > Live 

● 

 : Displays the camera of the corresponding channel as a list or a thumbnail. 

● 

Camera name : Display the camera name.

● 

IP address : Display the IP address of a camera.

● 

Live replacement : You can select the live profile setup mode. 
If you select <

manual

> the profile setup items are enabled, and you can change settings manually.

–  Auto : For the profile for live monitoring, a profile optimized for each split mode is displayed, along with the 

‘

Live4nVr

' profile automatically generated at the time of the camera registration.

–  Manual : Live monitoring is performed with the profile selected by the user from the registered camera 

profiles.

–  Record : Live monitoring is performed with the profile set for recording. 

● 

Profile : You can set the camera profile.

● 

Codec : Show the codec of the selected profile.

● 

Resolution : Show the resolution of the selected profile.

● 

Frame rate : Show the frame rate of the selected profile.

● 

Edit : You can add, change, and delete the camera profiles.

Summary of Contents for XRN-3210B4




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands