Remote control
EN
HBT3000 series user manual
Copyright © Qingdao Hantek Electronic Co., LTD
58
After successful connection, the network port icon in the upper right corner of the
machine measurement display interface is displayed as follows:
Figure 9-4 Network interface icon display
Like USB remote control, after obtaining normal communication, SCPI instructions
can be used to control the power output.
If there is a DHCP server in the local area network, the DHCP function can be
turned on, and the instrument will automatically obtain IP and other information
from the DHCP server without the need for manual settings.
Note:
There is no DHCP server in the local area network, and IP and other
information must be manually configured.
9.3
Serial port control
Click on
[Utility] ->
IO
->
Serial
, and set the serial port parameters of the internal
resistance tester.
Click on the
Baud
, and the available baud rates are 9600, 19200, 38400, 57600,
115200, and 230400.
Click on the
Data
, there are 7 and 8 data bits to choose from.
Click on the
Check
to select no checksum, odd checksum, and even checksum.
Click on the
Stop
, and there are 1 and 2 stop bits to choose from.
Use an RS232/485 cable to connect the computer's RS232/485 port to the
RS232/485 interface on the rear panel of the internal resistance tester.
Figure 9-5 RS232/485 connector
Needle
number
Signal name
Signal
Notes
customary
EIA
JIS
1
DCD
CF
CD
Not used
Not
