Start using
EN
HBT3000 series user manual
Copyright © Qingdao Hantek Electronic Co., LTD
20
5
Start using
⚫
To prevent electric shock accidents, please do not short circuit the top of
the test line and the line with voltage.
⚫
Do not measure AC voltage, AC current, or DC current. Otherwise, it may
cause instrument damage or personal injury accidents.
⚫
To prevent electric shock, please confirm the rated value of the test wire
before measurement, and do not measure voltage higher than the rated
value.
5.1
Measurement Settings
Click the
[Range]
button to enter the measurement display interface.
Figure 5-1 Measurement display interface
Note:
If no settings are made in other interfaces (except the calibration interface)
for more than 30 seconds, the instrument will automatically jump to the
measurement display interface.
5.1.1
Setting Type
Click the
Type
menu soft key to select categories such as V&R, Voltage, and
Resistance.
V&R: Simultaneously measure and display voltage and resistance, as shown in
Figure 5-1.
Voltage: Measure and display the voltage value, as shown in the following figure.
