Application measurement
EN
HBT3000 series user manual
Copyright © Qingdao Hantek Electronic Co., LTD
32
Hi: The measured value exceeds the upper and lower limits or proportional range.
In: The measured value is within the upper and lower limits or proportional range.
Lo: The measured value is below the upper and lower limits or proportional range.
6.3
Statistical operation function
Click the
[STAT]
button to enter the statistical calculation function interface, as
shown in the figure. The following will introduce the statistical function switch,
statistical results, normal distribution map, save/load, data load, and clear data
functions.
Figure 6-11 Statistical operation function
6.3.1
Switch of statistical function
Click on the
[STAT] ->
Switch
in sequence to set the switch for the statistics
function. Press the corresponding soft key to turn on or off the statistics function.
After turning on the statistics function, the current count will be displayed in real-
time on the screen.
After turning off the statistics function, if data clearing is not performed and the
statistics function is turned on again, the instrument will accumulate on the basis
of the original count.
6.3.2
Statistical Results
The viewing methods for statistical results are divided into [Index] and [List].
Click on
[STAT] ->
StatResult
->
Index
in sequence, and the statistical indicators
will be displayed as follows:
