Application measurement
EN
Copyright © Qingdao Hantek Electronic Co., LTD
HBT3000 series user manual
25
6
Application measurement
6.1
Measurement Configuration
The measurement page has 5 test configurations: [Sample], [Average], [Trigger]
，
[Absolute] and [Delay].Below are the functions and setting methods of these
measurement configurations.
6.1.1
Setting the sampling rate
The sampling rate can be changed in three stages (Slow/Horotelic/Fast).The lower
the sampling rate, the higher the testing accuracy.
Steps for switching sampling rate:
Click on the
[MEA]
button, and the display will be as follows:
Figure 6-1 Measurement display interface
Click on the
Sample
and it will display as follows. Press the corresponding soft
key again to complete setting the sampling rate.