Application measurement
EN
HBT3000 series user manual
Copyright © Qingdao Hantek Electronic Co., LTD
42
from. Click the corresponding soft key to save to the corresponding status
location. If you want to save the startup settings to 0 state, you need to click the
0
soft key, and the screen will pop up "Save Stat0. bin successful!", indicating that
the settings are successful. If the entered state already exists, clicking the
corresponding soft key will overwrite the original state configuration.
External save setting steps: After setting the required storage options, click on
Exter Save
, and the instrument will automatically generate a file name and save
the status to the USB drive.
6.8.3
Boot Set
The startup settings include: default, previous, 0, 1, 2, 3, 4, and 5. The instrument
is set to default by default.
⚫
Default: The signal generator automatically calls up the default settings when
turned on.
⚫
Last Off: The internal resistance tester automatically saved the settings before
shutdown, and after restarting, the internal resistance tester will automatically
call up the settings before the previous shutdown. Including all system
parameters, except for clock sources.
⚫
0, 1, 2, 3, 4, and 5: refer to the boot configuration stored inside the machine.
Press the
[SAVE] ->
Boot Set
soft key and select the desired configuration type.
6.9
Load
The loading function can load the configuration used when the instrument is
powered on from internal memory or USB drive. Click the
[LOAD]
button to pop
up a loading function menu, which includes storage functions such as [Load Path],
[Inter/Exter Load], and [Boot Set] options.
Note:
The configuration loaded here is the one used when the instrument is
powered on, that is, the startup settings.
6.9.1
Load Path
The loading path is divided into [Interl] and [Exter].
Click
[LOAD] ->
Load Path
in sequence, and click the corresponding soft key to
select internal or external.
6.9.2
Inter/Exter Save
When selecting internal loading path, the menu bar displays Intern; When the
loading path is selected as external, the menu bar displays Extern.
