Hantek 500MSa/s, Introduction Manual

Page: 37 / 65

Option Setting
Introduction
Table 2-39 Auto measure function4-Delay measure menu:
Source
CH1、CH2、MATH、
REFA、REFB Select input signal source for
Delay measure.
Type
Phase、FRR、FRF、
FFR、FFF、LRR、
LRF、LFR、LFF
Press the Type button or turn the
Universal knob to select Delay
measure parameter.
Display the corresponding icon and
measure value of your selected
Delay measure parameter.
Return
Return to the first page of auto
measurement menu.
Table 2-40 All Measurement function menu:
Option Setting Introduction
Source
CH1
CH2
Select input signal channel.
Voltage
On
Off
Turn on the all measurement function to
measure voltage parameters.
Turn of the all measurement function to
measure voltage parameters.
Time
On
Off
Turn on the all measurement function to
measure Time parameters.
Turn of the all measurement function to
measure Time parameters.
Delay
On
Off
Turn on the all measurement function to
measure Delay parameters.
Turn of the all measurement function to
measure Delay parameters.
Return Return to the All Measure main menu.
Table 2-41 Introduction of the Measure Type:
Introduction
Measure Type
The most positive peak voltage measured over the entire waveform.
The most negative peak voltage measured over the entire waveform.
Measures the absolute difference between the maximum and
minimum peaks of the entire waveform.
Measures the highest voltage over the entire waveform.
Measures the lowest voltage over the entire waveform.
Voltage between Vhig and Vlow of a waveform.
The arithmetic mean over the first cycle in the waveform.
The arithmetic mean over the entire waveform.
The true Root Mean Square voltage over the first cycle in the waveform.
The true Root Mean Square voltage over the entire waveform.
Defined as (Vmax-Vhig)/Vamp after the waveform rising.
Defined as (Vmin-Vlow)/Vamp after the waveform falling.
Defined as (Vmin-Vlow)/Vamp before the waveform rising.
Defined as (Vmax-Vhig)/Vamp before the waveform falling.
Rise Time Measures the time between 10% and 90% of the first
rising edge of the waveform.
Fall Time Measures the time between 90% and 10% of the first
falling edge of the waveform.
The duration of a burst Measured over the entire waveform.
+ Width Measures the time between the first rising edge and the
next falling edge at the waveform 50% level.
-Width Measures the time between the first falling edge and the
next rising edge at the waveform 50% level.
Measures the first cycle waveform.Positive Duty Cycle is the ratio
between positive pulse width and period.
Measures the first cycle waveform.Negative Duty Cycle is the ratio
between negative pulse width and period.
The amount one waveform leads or lags another in time. Expressed
in degrees, where 360 degrees comprise one waveform cycle.
The time between the first rising edge of source 1 and the first
rising edge of source 2.
The time between the first rising edge of source 1 and the first
falling edge of source 2.
Vmax
Vmin
Vpp
Vtop
Vbase
Vamp
Vavg
Mean
Crms
Vrms
ROVShoot
FOVShoot
RPREshoot
FPREshoot
Rise Time
Fall Time
BWid
+ Wid
- Wid
+ Duty
－Duty
Phase
FRR
FRF
66 Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
67