2.13.8 Waveform Record
Waveform recorder can record input waveform from CH1 and CH2, with a maximum
record length of 2500 frames. This record behavior can also be activated by the
pass/fail test output, which makes this function especially useful to capture abnormal
signals in long term without keeping an eye watching it.
Waveform recorder: Record the waveforms with specified interval.
To record waveforms, follow these steps:
●
Press
the UTILITY button to enter Utility menu.
●
Press
the Next Page option button to enter the third page of Utility menu.
●
Press
the Record button to enter Waveform Record Menu.
●
Press
the Mode option button to select Record.
●
Press
the Source option button to select the input signal channel.
●
Select
Interval option, turn the Univeral knob to adjust time interval
between record frames.
●
Select
End Frame, select the Universal knob to adjust the max record frame.
●
Press
in Operateoption to record waveform.
Play Back: Play back current record waveforms or saved record waveforms.
Table 2-65 Waveform play back function menu 1:
Option
Setting
Introduction
Mode
Play Back
Set the Play Back function menu.
Operate
Run
Stop
Press to start playback playing.
Press to stop playing.
Play Mode
Set circular play mode.
Set single time play mode.
Interval
Set time interval between frames.
Next Page
Page 1/2
Enter the second page of Play Back menu.
Option
Setting
Introduction
Table 2-64 Waveform recorder function menu:
Mode
Record
Play Back
Storage
Off
Set Record function menu.
Set Play Back function menu.
Set Storage function menu.
Turn off waveform recorder menu.
Source
CH1
CH2
P/F-OUT
Select record source channel.
Interval
Set time interval between record frames.
End Frame
Set max number of record frames.
Operate
Record
Stop
Press to start recording.
Press to stop recording.
98
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
99
