1. Set up waveform display type
●
Press
the DISPLAY button to enter the Display menu.
●
Press
the Type option button to select Vectors or Dots.
7. Set up Grid
●
Press
the Grid option button to select , or to set the
screen whether display grid or not.
8. Set up Menu Display
●
Press
the Menu Display option button to select 2 sec, 5sec, 10sec,
20sec or Infinite to set menu display time on screen.
9. Set Skin
●
Press
the skin option button or turn the Universal knob to select Classical,
Modern, Traditional or Succinct.
2.10.1 X-Y Format
Use the XY format to analyze phase differences, such as those represented by
Lissajous patterns. The format plots the voltage on channel 1 against the voltage
on channel 2, where channel 1 is the horizontal axis and channel 2 is the vertical
axis. The oscilloscope uses the untriggered Sample acquisition mode and displays
data as dots.
XY mode has a breakthrough that trad oscilloscopes restrict sampling rate at
1MSa/s，
support 5KSa/s～200MSa/s (1-2.5-5
sequence) adjusted. The other series support 25KSa/s～500MSa/s (1-2.5-5
sequence) adjusted
4Kpts memory depth Series
Operate Introduction:
Note
1. The oscilloscope can capture a waveform in normal YT mode at any sampling rate.
You can view the same waveform in XY mode. To do so, stop the acquisition and
change the display format to XY.
2. Set up Persist
●
Press
the Persist option button to select Off, 1 Sec, 2 Sec, 5Sec or
Infinite. You can use this option to observe some especial waveforms.
3. Set up Intensity
●
Press
the Intensity option button and turn the Universal knob to adjust
waveforms' intensity.
4. Set up Brightness
●
Press
the Brightness option button and turn the Universal knob to adjust
grid brightness.
4. Set up display format
●
Press
the Next Page option button to enter second display menu.
●
Press
the Format option button to select YT or XY.
6. Set up Screen
●
Press
the Screen option button to select Normal or Inverted to
set the screen display color.
56
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
57
2
sec
