66
of the fork arm carrier is less than 50mm; otherwise, it will affect the lateral stability of the
forklift truck.
5. For accessories with a rotation function (roll clamp, soft clamp, multi
-
purpose rigid arm
clamp, bucket clamp) after hanging and installation, stop blocks should be welded on both
sides of the joint between the upper beam of the fork arm carrier and the accessories to
prevent sliding when operating them.
6. When accessories with lower hook positioning are installed, the joint spacing between the
lower hook and the lower beam of the fork arm carrier should be adjusted appropriately.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...