HANGCHA XF Series, Operation Manual

Page: 33 / 73

30
above scale “45”.
3t - 3.5t forklift truck with standard mast
requires hydraulic oil to be added to above
scale “47” and the forklift truck with tertiary
mast requires hydraulic oil to be added to
above scale “50”.
In addition to meeting the aforesaid
requirements, the oiling liquid level should not
exceed the scale mark by 30mm.
The full free lift mast, side shift fork mast and
installed accessory mast should be
implemented according to the aforesaid
standards.
4.0t - 5.5t
Scale value for symbol
○
45
is applicable to the
4.0t - X5.5t forklift truck.
When the mast is in the minimum position, the
oiling quantity is as follows:
Standard mast requires hydraulic oil to be
added to scale “70” and the forklift truck with
tertiary mast requires hydraulic oil to be added
to scale “74”.
7. Brake fluid quantity check (1.0t - X5.5t)
Check the brake fluid reservoir. Check whether
the brake fluid quantity is within the scale; if
the liquid quantity is insufficient, please top it
up and check whether there is air in the brake
line.
Caution
Prevent dust and water from mixing with oil
when adding brake fluid.
Brake fluid is toxic and corrosive and should
be rinsed off if you are exposed to it.
8. Light check.
Ensure that the light turns on when the ignition
key switch is on.
9. Indicator light check.
Toggle the indicator light control lever and
check whether the indicator light operates
normally.
10. Hand brake check.
① The truck slows down.
② The truck brakes and stops when the hand
brake lever is pulled up. The truck must not
swerve.
11. Reversing light and reversing buzzer check.
When the shift lever is in the R position, the
reversing light turns on and the reversing
buzzer rings.
12. Steering.
① The truck slows down.
② Turn the steering wheel three turns
clockwise and anticlockwise, respectively.
Observe whether the left and right steering
force are the same.
13. Horn.
Press the horn button and check whether the
sound is normal.
14. Seat adjustment and safety belt check.
Pull the seat adjusting lever back, adjust the
driver's seat to the comfortable position for
your hands and feet, release the seat adjusting
lever, and lock it.
Check whether the safety belt works normally.
15. Shift lever.
Check whether the shift lever is loose and
whether it is stable when shifting gear.
16. Lift lever, tilt lever and accessory lever
Check whether the lift lever, tilt lever and
accessory lever are loose and whether they
return properly.
Increase the engine speed, respectively
operate the lift lever, tilt lever, and accessory
lever, and ensure that the forks can be fully
lifted and lowered and the mast can tilt
forward and backward.
17. Instruments and sensor.
Check whether the stopwatch,
water - thermometer, oil thermometer,
transmission oil temperature sensor, fuel
sensor, engine water temperature sensor, oil
pressure sensor and others are normal.
18. Brake and inching pedal check.