background image

               

64 

XV. Use, installation and safety rules for accessories

 

 

Hangcha selects accessories, such as the flat clamp, rotating clamp, roll clamp, string rod, side shifter 

and  others  in  accordance  with  ISO2328  Fork  Lift  Trucks

-

Hook

-

on  Type  Fork  Arms  and  Fork  Carriers

-

 

Mounting Dimensions.

 

 

Side shifter                    Fork positioner                  Rotator                Push

-

puller                String rod                                                                                                         

 

 

Round rod clamp                    Roll clamp              Brick clamp      Load bearing stabilizer    Rotating fork

 

1.How to use accessories

 

(1) Become familiar with the relevant content on the nameplate of the forklift truck, read the relevant 

operation  manual  carefully  before  use  (especially  the  user  manual  and  installation  manual  of  the 

professional  accessory  company),  and  be  trained  and  qualified  to  operate  the  forklift  truck 

accessories.

 

(2) Fully understand the basic performance and operation methods of forklift accessories, especially 
the allowable load, lift height, cargo size and the fitting range of accessories;   

 

(3) When operating forklift truck accessories with multiple functions, such as side shift, clamping or 

rotation,  do  not  perform  multiple  operations  at  the  same  time.  One  action  can  be  carried  out  only 

after the other one is completed.       

 

(4) Forklift trucks provided with accessories must not be driven when the cargo is at a high level; when 

the cargo volume is too large do not drive the forklift truck forwards; when transporting cargo, ensure 

that cargo is 300mm above the ground, and the mast is tilted backward.

 

(5) The weight of the cargo should not exceed the limit of the combined bearing capacity of the forklift 
truck and accessories. Try not to load eccentrically at high cargo positions. Attachments with side shift 
function can only be operated for a short time. Eccentric load is strictly limited to 100mm on the left 
and right (the side shift amount for the side shifter above 5 tons (including 5 tons)) is within the range 

of ±150mm).

 

(6) Except for the driver's position which is protected by the overhead guard, it is strictly prohibited to 
stand within 2 meters of the projection area under accessories and cargo to avoid injury.

 

(7) It is strictly prohibited to emergency brake the forklift truck with accessories when driving and it is 

required to drive slowly with a load.

 

(8) Do not allow external forces to act on the truck when the attachment is working; it is forbidden to 
use the attachment for unsuitable purposes, and the normal working range of the attachment must 
not be exceeded.

 

Summary of Contents for XF Series










































































Reviews: