24
Caution
Check the road to be driven, holes, abrupt
slopes, barriers, bumps, and road conditions
that may cause loss of control and vibration.
·Remove rubbish, debris and foreign matter
that may puncture tires and throw cargo out
of balance.
·Slow down on slippery roads, do not drive on
the edge of the road, and take extra care
when it cannot be avoided.
·Uneven ground will cause vehicle
vibration and noise.
High tire pressure will
cause vehicle vibration and noise.
Warning
Do not use the forklift truck in sand, snow,
lightning, rain, wind and other bad weather
conditions.
23. Reverse downhill and climb facing forward
when loaded. The opposite applies when
unloaded.
Do not turn on the ramp to avoid rolling over.
24. Keep the engine at idle and step on the
brake pedal intermittently when driving
downhill.
25. It is dangerous to lift the forks when driving
with or without load; the standard driving
condition (the distance between the forks and
the ground is 15cm
-
30cm) should be
maintained.
Do not conduct side shift operations when the
forks are raised to protect the forklift truck
from losing balance.
Forklifts
with
attachments
should
be
considered vehicle loads.
26. The mast should tilt backward and the
height of cargo should be lowered as much as
possible when the truck is operated under
load.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...