21
Mirror
A mirror is installed on the upper right of the
overhead guard for observing conditions
behind the truck or when reversing.
LED front combination light
The two front combination lights (headlight,
indicator light and clearance light) are installed
on the front support of the overhead guard.
Pay attention to the protecting lights; if there is
any dust, they should be wiped clean; if there
is any damage, they should be replaced.
Rear combination light
Disassemble the rear combination light from
the overhead guard and take care to ensure
your safety.
1
、
Take the whole combination light to
the maintenance site, remove the rear
lampshade,
and
unscrew
the four
mounting screws on the back of the lamp
housing.
2
、
Take out the panel, loosen the two
screws to fix the connector, disconnect the
connector, and replace with a new panel.
3
、
The assembly steps are a reverse of
the disassembly ones.
ECU diagnosis interface
The ECU diagnosis interface of the engine is
under the right engine hood of the truck and is
provided with a dust cover.
Regularly check whether the dust cover is
damaged and remove any dust and oil
contamination on the ECU diagnosis interface.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...