18
Keep the safety belt fastened tightly during
daily operation to protect yourself and reduce
injury if the truck rolls over.
· Unfasten the safety belt
Press the red button (with the text "PRESS") on
the socket with your left thumb to unfasten the
safety belt.
·Check the safety belt
Frequently check whether the bolt to fix the
safety belt is secure. Do not press the safety
belt on a hard or fragile object and do not rub
the safety belt with sharp objects to avoid
damage.
Do not disassemble components on the safety
belt without permission. Visual inspections
should be routinely conducted for belts that
have been used frequently.
⚫
Cutting or fraying
⚫
Wear or damage of metal parts, including
the locating point
⚫
Buckle or retractor fault
⚫
Damage
If any abnormality is found, a new belt should
be fitted immediately; the service life of the
belt is 3 years; if any abnormality is found, the
belt should be replaced earlier.
Overhead guard
The overhead guard protects the operator
from falling objects. It must have sufficient
impact strength. The forklift truck must not
be used without an overhead guard.
Lock catch components
In order to prevent the internal combustion
engine hood from being opened without
permission, the truck is fitted with a locking
hood; in order to open the internal
combustion engine hood, the lock handle
should be pulled. The internal combustion
engine hood can then be released.
Optional configuration: In order to prevent
the internal combustion engine hood from
being opened without permission, the truck
is provided with a lock and the internal
combustion engine hood can only be opened
with a key.
Internal combustion engine hood
The internal combustion engine hood with a
large opening is convenient for service and
maintenance. The inner air strut of the internal
combustion engine hood allows it to be fully
opened with very little force.
Press the red button on the gas spring collet
when closing; then, release the lock catch;
press down the head of the internal
combustion engine hood to close it; a click
indicates that the internal combustion engine
hood has locked.
Caution
In order to open the internal combustion
engine hood, a key is required. Position the
key horizontally and push backward to open
the engine hood.
Take care to prevent your fingers from being
trapped by the internal combustion engine
hood when closing.
1
2
WARNING
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...