16
adjusting lever for locking.
Caution
a. Adjust the steering wheel tilt angle after
the forklift truck has stopped and the hand
brake is engaged.
b. Forcibly move the steering wheel up and
down to ensure that it has been locked after
adjusting.
Direction lever [15]
The direction lever is installed on the left side
of the steering hub column. This series of
forklift trucks adopt electrical steering and the
functions realized by moving the lever forward
and backward are as follows:
1.5~X5.5t
F
Forward
N
Neutral
R
Reverse
4.0~x5.5t
F
Forward
N
Neutral
R
Reverse
Press the brake pedal to the bottom to fully
stop the truck before changing the driving
direction; push the lever forward to engage
forward gear I; pull up and push the lever
forward to engage forward gear II from gear I.
Press the brake pedal to slow down if it is
required to reverse; pull back the lever to
engage reverse gear I; pull up and push the
lever back to engage reverse gear II from
reverse gear I.
Caution
The engine can only be started when the
lever is in the neutral position.
Emergency power
-
off switch [17]
Press down the emergency power
-
off switch to
disconnect the electric appliances from the
battery.
If the forklift truck needs to be restarted, the
emergency power
-
off switch should be
toggled.
Close
the emergency power
-
off switch 30s
after shutdown.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...