26
Hangar 9 Pulse 125 ARF Assembly Manual
Step 2
Remove the engine from the firewall. Use four 3mm x 6mm
button head screws to secure the cowl to the fuselage.
Step 3
Use a felt-tipped pen to transfer the outline from the
template on the cowl.
Step 4
Use a hobby knife to trim the line coming from the clunk to
attach it to the carburetor.
Step 5
Remove the cowl and trim it using the lines made in the
previous step. With the engine back on the firewall, check to
make sure the cowl will fit over the engine. Take your time
trimming the cowl to achieve the best fit. Use a rotary tool
and sanding drum to smooth any rough edges around the
engine.
Step 6
Use the instructions provided with the engine to attach the
muffler. Trim and connect the pressure line from the fuel
tank to the muffler.
Step 7
Slide the spinner backplate on the engine shaft.
